Die wichtigsten Neuerungen der neuen Version:

1. NEU: Leapfrog original IFC-Modell in FIT Bodenschichtenmodell konvertieren
2. NEU: Baugruben einfach kopieren – spart Zeit und erhöht die Effizienz
3. NEU: Übergangskanten bei Baugruben – für realitätsnahe Modellierungen
4. VERBESSERUNG: Noch komplexere Baugrubengeometrien möglich z.B. geneigte Bodenplatten mit Ausrundungen
5. VERBESSERUNG: Böschungseigenschaften von Kanten lassen sich jetzt bequem auf andere übertragen

Zusätzlich geben wir Ihnen zwei praktische Tipps & Tricks für Ihre tägliche Arbeit mit FIT:

• Erzeugen von Spritzbetonwänden mit Bodennägeln auf Basis von Aushüben
• Längsschnitt entlang einer gebogenen Achse

Termin

Der Beitrag Online training FIT basics erschien zuerst auf FIDES DV-Partner.

Goal

Participants will learn in detail about the possibilities of Revit family creation.

Dates

Topics

• Generation of parameterised cross-sections
• Parameters and attribution
• Family templates and nested families
• Creation of various installations

Participation requirements

• Basic knowledge of Revit
  • Revit Grundlagenschulung
• Die Teilnehmer arbeiten an Ihrem eigenen Arbeitsplatz im Büro, die Übertragung des Bildschirms erfolgt über GoToWebinar. Zusätzlich wird der Schulungsleiter bei Bedarf über TeamViewer die Teilnehmer bei Übungen unterstützen. Die Verwendung von zwei Monitoren wird empfohlen.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online advanced training Revit families erschien zuerst auf FIDES DV-Partner.

Goal

The training participants are given basic knowledge about the new functions for working with AutoCAD drawings.

Dates

Topics

• Release of drawings
• Annotating drawings
• Processing of comments
• Comparing drawings
• Versioning drawings

Participation requirements

• AutoCAD basic knowledge required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online advanced training AutoCAD/AutoCAD LT erschien zuerst auf FIDES DV-Partner.

Goal

The training participants receive a detailed overview of the modelling of subsoil, excavations and infrastructure structures in Revit with the FIDES Infrastructure Toolbox.

Dates

Topics

• Import and edit DTM
• Creating floor layers
• Create excavations
• Place shoring (sheet pile wall, soldier pile wall, …)
• Interface to the FIDES structural analysis programmes (very small part approx. 15 minutes)
• Creating fills
• Output of excavation and backfill materials
• Plan creation (slope hatching, dimensions, height coordinates, …)
• Defining axes
• Creating components along axes

Participation requirements

• Revit basic knowledge required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online training FIT basics erschien zuerst auf FIDES DV-Partner.

Goal

The training participants receive detailed information on the analysis and optimisation of complex DTMs, the processing of soil layers and the creation of complex excavations. In addition, we deepen the possibilities of the longitudinal section along curved spatial curves, e.g. bridge or tunnel axis.

Dates

Topics

• Analysing, checking and editing DTMs
• Processing of floor layers incl. Layer progression
• Creating and working on complex excavation pits (excavation pits with rounded edges, different slope inclinations, excavation pits with gradients)
• Working with construction phases

Participation requirements

• Revit und FIT Grundkenntnisse erforderlich
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag NEW: Online advanced training FIDES Infrastructure Toolbox – FIT erschien zuerst auf FIDES DV-Partner.

Goal

Ziel dieser Schulung ist es, einen Überblick über die Möglichkeiten der Bewehrungsplanung mit Autodesk Revit zu geben. Die Herausforderung liegt nicht unbedingt in der Modellierung der 3D-Bewehrung, sondern eher in der Reduktion des Modellierten und der Erstellung lesbarer 2D-Pläne. Diese Funktionen werden die Teilnehmer in Übungen nachvollziehen können und sind danach in der Lage, in der Ausführungsplanung abgabereife Bewehrungspläne zu erzeugen. Außerdem lernen die Teilnehmer, welche Bewehrungsfunktionen allein mit Revit verfügbar sind und für welche Aktionen der Aufsatz SOFiSTiK Reinforcement notwendig ist.

Dates

Topics

• Basics of reinforcement planning
• Modelling the reinforcement for all reinforced concrete components
• Edit steel bar
• Mesh reinforcement
• Editing steel bars with SOFiSTiK Reinforcement Detailing
• Plan creation with SOFiSTiK Reinforcement Detailing
• Analyses

Participation requirements

• Basic knowledge of Revit
  • Revit Grundlagenschulung
• Die Teilnehmer arbeiten an Ihrem eigenen Arbeitsplatz im Büro, die Übertragung des Bildschirms erfolgt über Microsoft Teams. Zusätzlich wird der Schulungsleiter bei Bedarf über TeamViewer die Teilnehmer bei Übungen unterstützen. Die Verwendung von zwei Monitoren wird empfohlen.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online advanced training Revit Reinforcement with SOFiSTiK Reinforcement erschien zuerst auf FIDES DV-Partner.

Goal

The course participants receive an overview of the most important functions and are able to calculate excavations with WALLS shoring independently after the course.

Dates

Topics

Excavation pits with WALLS shoring

• Basis of calculation
• Programme options
• Workshop with different types of shoring

Stability analyses

• Slope failure
• Ground failure
• Angled retaining walls

Participation requirements

• No basic knowledge required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online training shoring basics erschien zuerst auf FIDES DV-Partner.

Goal

The aim of this course is to create a digital model, derive the corresponding formwork and position plans and quantities from it and adapt the calculation model. This will enable you to work on simple projects.

Dates

Topics

• BIM basics – Revit way of thinking
• User interface
• File formats and linking of inventory data
• Exercise example construction project (building construction or bridge construction)
• Phases and phase filters
• Component lists
• Creation of plans
• Labelling and dimensioning
• Formwork and position plans
• Creation of standard project families

Participation requirements

• No knowledge of Revit required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online basic training Revit / Revit LT erschien zuerst auf FIDES DV-Partner.

Goal

The course participants will receive an introduction to the most important AutoCAD functions and will be able to create, layout and plot simple 2D drawings independently after the course.

Dates

Please contact us if you would like an alternative date or would only like to take part in individual training blocks.

Topics

• Setting up the user interface / options
• Draw & change objects
• Model and layout area, plotting of drawings
• Layer technology
• AutoCAD labelling functionality and documentation of drawings

Participation requirements

• No previous knowledge required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online basic training AutoCAD/AutoCAD LT erschien zuerst auf FIDES DV-Partner.

Goal

The aim of the training is to understand and learn the functions with which SOFiCAD makes the completion of daily design tasks more efficient.

Dates

Please get in touch with us if you would like an alternative date or would only like to take part in individual parts of the training (SOFiCAD Design or SOFiCAD Reinforcement only).

Topics

• User interface and settings
• Plan structure and project database
• SOFiCAD “Building”: Stairs, walls, openings, section line/detail circle, details
• Hatching, labelling and dimensioning
• Axes, positioning and mounting parts
• Reinforcement parameters, styles and label editor
• Modelling and laying of steel bars
• Editing steel bars
• Laying mats
• Drawing and list mats
• SOFiCAD Steel List (Report Browser & Word Format)

Participation requirements

• Basic knowledge of AutoCAD required
• Participants work at their own workstation in the office and the screen is transmitted via Microsoft Teams. In addition, the trainer will support the participants in exercises via TeamViewer if required. The use of two monitors is recommended.

Notes

The seminars take place with at least 3 registrations. Otherwise, and if there are more than 10 registrations, a new date will be arranged at short notice. Registrations will be considered in the order in which they are received. All training fees are per participant and excl. legal. VAT.

Cancellation of online seminars and individual training courses / right of cancellation:

• Registration for our training courses is binding.
• You will receive a registration confirmation by e-mail after registration. You have the right to cancel your registration in writing up to 8 days before the start of the course without giving reasons and without incurring any participation fees.
• If the cancellation is made within 7 days before the start of the seminar, 100% of the agreed participation fee is due. However, a substitute participant can be registered. It is also possible to postpone participation. The booked participant can make a reservation for the next training course taking place and make up for the training participation. The same applies if training is cancelled (due to illness).
• The full participation fee will also be charged in the event of a no-show.
• FIDES reserves the right to cancel or postpone scheduled training courses 7 days before the start of the seminar if the number of participants is too low. In the event of cancellation by FIDES, the participation fee will of course not be charged.

Der Beitrag Online basic training SOFiCAD design and reinforcement erschien zuerst auf FIDES DV-Partner.