FIDES-WinTUBE was originally developed for tunnelling and therefore contains a large number of wizards that optimally support the user with tunnelling-specific problems.

However, the functionality is so generalised that FIDES-WinTUBE can be used for many finite element calculations.

FIDES-WinTUBE was originally developed for tunnelling and therefore contains a large number of wizards that optimally support the user with tunnelling-specific problems.

However, the functionality is so generalised that FIDES-WinTUBE can be used for many finite element calculations.

Especially when spatial volume elements and/or the consideration of successive construction stages (load history) are required. The integrated SOFiSTiK interface is used to generate not only the input data sets for the FE mesh structure, but also the data for the entire calculation process. Manual intervention in the generated SOFiSTiK input files is not necessary, but is possible at any time. The calculation is performed with the SOFiSTiK calculation kernels TALPA or ASE. In addition to a technical report with graphics and a detailed description of the calculation, the results plots are also generated. The SOFiSTiK tools can be used to visualise the results.

FIDES WinTUBE-2D

FIDES WinTUBE-3D

Areas of application – Tunnelling

• Open construction
• Shotcrete construction
• TBM tunnelling
• Segment linings
• Special blocks such as tunnel crossings, emergency exit junctions, portal blocks, etc.
• 3D detail verifications, e.g. segment joints, …

Areas of application – Geotechnics/foundation engineering

• Shaft calculations, soil injection, icing, hydraulic ground failure
• Slopes, cuttings, complex excavations
• Dams, soil-structure interaction
• Foundations of complete systems on solid elements, combined pile and slab foundations
• Locks, embankment structures, dams, …

Areas of application – General

• All types of volume models, e.g. laminated glass panes, elastomeric bearings, …
• Dynamic systems, e.g. rockfall, …
• Membranes

Expansion stages

• FIDES-WinTUBE-2D (flat discs)
• FIDES-WinTUBE-3D+ (complete package, also includes the segment shell assistant)

Der Beitrag FIDES-WinTUBE erschien zuerst auf FIDES DV-Partner.

The Cubus programmes help engineers to achieve their goals more quickly. They are characterised by simple handling and efficient calculation models that are easy to understand from an engineering point of view and enable productive work. The programme range includes solutions for static and dynamic 3D building analyses, non-linear cross-section analyses and the calculation of complex prestressed surface and beam structures.

CEDRUS

Calculation and design of reinforced concrete slabs using the FE method. Options: Building model (vertical loads), earthquake model (horizontal loads)

You can find more information from the manufacturer…

Expansion stages

• Base module (panels)
• Building model (option G)
• Building Information Modelling (BIM)
• Horizontal loads and earthquake model (option H)
• Foundations, soil-structure interaction (option F)
• Discs (Option S)
• CADview (Option CV)
• CADextract (Option CX)
• Preload (option V)
• Dynamics (option D)
• Adhesive reinforcements (option K)
• Reinforcement optimisation (option R)
• Load capacity (option T)

STATICS

Calculation of planar and spatial beam structures according to theory 1. and 2nd order. Dynamic calculations with the response spectrum method.

You can find more information from the manufacturer…

Expansion stages

• Basic module and option 3 for spatial systems
• Building Information Modelling (BIM)
• Non-linearities (option N)
• Dynamics, earthquake analyses (Option D)
• Specialities (Option S)

FAGUS

Cross-section analysis: analyses of reinforced concrete, prestressed concrete and composite cross-sections, thin-walled cross-sections, inclined bending.

You can find more information from the manufacturer…

Der Beitrag CUBUS erschien zuerst auf FIDES DV-Partner.

SOFiSTiK and FIDES 2D structural analysis package for tunnelling

The complete package offers you the latest FE calculation kernels from SOFiSTiK as well as graphical input and output with WinTUBE. FIDES Tunnelling 2D provides you with a powerful solution for your tunnelling projects.

This product offers you everything you need to plan your tunnelling projects efficiently and precisely.

The package includes the following modules

• SOFiSTiK TALPA (FE computing core)
• FIDES-WinTUBE-2D

Areas of application

• Open construction
• Shotcrete construction
• TBM tunnelling
• Segment linings
• Soil injection, icing, hydraulic ground failure
• Slopes, cuttings, complex excavations
• Dams, soil-structure interaction
• Locks, embankment structures, dams, …
• Concrete in state II, non-linear joints, hot design, …
• Automatic phi-c reduction
• Groundwater seepage flow + temperature passage (requires SOFiSTiK HYDRA)

Pricing model

The following price information refers to the package price for FIDES Tunnelling 2D as a single user licence and subscription. Please contact us for an individual offer for purchase and/or network licences.

ABO FIDES Tunnelling 2D as a single user licence with different terms

• 3 months: €1.070,- plus VAT.
• 6 months: €1.790,- plus VAT.
• 12 months: €2,850 plus VAT VAT.

Errors excepted

Der Beitrag Tunnelling package 2D erschien zuerst auf FIDES DV-Partner.

SOFiSTiK and FIDES 3D structural analysis package for tunnelling

The complete package offers you the latest FE calculation and design kernels from SOFiSTiK as well as graphical input with WinTUBE. FIDES Tunnelling 3D provides you with a powerful solution for all your tunnelling projects.

This product offers you everything you need to plan your tunnelling projects efficiently and precisely.

The package includes the following modules

• SOFiSTiK Package 3D FEM Premium
• SOFiSTiK module ASE 4 (non-linear material behaviour of surface and volume elements)
• SOFiSTiK HISOLV (iterative equation solver)
• FIDES-WinTUBE-3D

Areas of application

• Open construction
• Shotcrete construction
• TBM tunnelling
• Segment linings
• Special blocks such as tunnel crossings, emergency exit junctions, portal blocks, etc.
• 3D detail verifications, e.g. segment joints, …
• Shaft calculations, soil injection, icing, hydraulic ground failure
• Slopes, cuttings, complex excavations
• Dams, soil-structure interaction
• Foundations of complete systems on solid elements, combined pile and slab foundations
• Locks, embankment structures, dams, …
• Concrete in state II, non-linear joints, hot design, …
• Groundwater seepage flow + temperature passage (requires SOFiSTiK HYDRA)
• All types of volume models, e.g. laminated glass panes, elastomeric bearings, …
• Dynamic systems, e.g. rockfall, …
• Membranes

Pricing model

The following price information refers to the package price for FIDES Tunnelling 3D as a single user licence and subscription. Please contact us for an individual offer for purchase and/or network licences.

ABO FIDES Tunnelling 3D as a single user licence with different terms

• 3 months: € 3.770,- plus VAT.
• 6 months: €6.290,- plus VAT.
• 12 months: €10.050,- plus VAT.

Errors excepted

Der Beitrag 3D tunnelling package erschien zuerst auf FIDES DV-Partner.

Our large package for geotechnical engineers and all engineers who want to work on complex tasks in foundation engineering. In addition to the verification of any excavation shoring, our programmes for the verification of retaining structures such as angular retaining walls, underpinning or gabion walls are also included here. In addition to our slip circle calculation, our FIDES-GeoStability programme is also part of the package. Using the Kinematic Element Method (KEM), any fracture mechanisms can be modelled and optimised here and most geometric situations can be correctly captured. The verification of nail walls is just as possible as reinforced soil, defined sliding layers, etc. Our FIDES-Flow programme can also be used to calculate steady and unsteady flows in the systems defined in this way. Our two programmes for verifying simple ground failure and settlement calculations round off the package.

Includes the following individual modules:

• WALLS shoring
• WALLS measurement
• FIDES-Flow
• FIDES-GeoStability
• FIDES angled retaining wall
• FIDES sliding circle
• FIDES foundation break
• FIDES setting
• FIDES-Gabion
• FIDES underpinning

Der Beitrag FIDES Package-GEOplus erschien zuerst auf FIDES DV-Partner.

FIDES-WinTUBE was originally developed for tunnelling and therefore contains a large number of wizards that optimally support the user with tunnelling-specific problems.

However, the functionality is so generalised that FIDES-WinTUBE can be used for many finite element calculations.

FIDES-WinTUBE was originally developed for tunnelling and therefore contains a large number of wizards that optimally support the user with tunnelling-specific problems.

However, the functionality is so generalised that FIDES-WinTUBE can be used for many finite element calculations.

Especially when spatial volume elements and/or the consideration of successive construction stages (load history) are required. The integrated SOFiSTiK interface is used to generate not only the input data sets for the FE mesh structure, but also the data for the entire calculation process. Manual intervention in the generated SOFiSTiK input files is not necessary, but is possible at any time. The calculation is performed with the SOFiSTiK calculation kernels TALPA or ASE. In addition to a technical report with graphics and a detailed description of the calculation, the results plots are also generated. The SOFiSTiK tools can be used to visualise the results.

FIDES WinTUBE-2D

FIDES WinTUBE-3D

Areas of application – Tunnelling

• Open construction
• Shotcrete construction
• TBM tunnelling
• Segment linings
• Special blocks such as tunnel crossings, emergency exit junctions, portal blocks, etc.
• 3D detail verifications, e.g. segment joints, …

Areas of application – Geotechnics/foundation engineering

• Shaft calculations, soil injection, icing, hydraulic ground failure
• Slopes, cuttings, complex excavations
• Dams, soil-structure interaction
• Foundations of complete systems on solid elements, combined pile and slab foundations
• Locks, embankment structures, dams, …

Areas of application – General

• All types of volume models, e.g. laminated glass panes, elastomeric bearings, …
• Dynamic systems, e.g. rockfall, …
• Membranes

Expansion stages

• FIDES-WinTUBE-2D (flat discs)
• FIDES-WinTUBE-3D+ (complete package, also includes the segment shell assistant)

Der Beitrag FIDES-WinTUBE erschien zuerst auf FIDES DV-Partner.

The package for BIM calculation and dimensioning in 3D

Using the SOFiSTiK Revit interface, in addition to the complete 3D model, 2D systems with automatic determination of the connection stiffnesses can also be read from the BIM model and networked. In addition, both cross-sections and systems can be entered graphically using the AutoCAD® SOFiPLUS attachment.

The functions at a glance

• 3D FE bar, shell, plate and disc elements
• Any bar cross-sections with graphical input
• Beams and joists as FE bars
• Automatic determination of elastic connection stiffnesses for 2D calculation when transferring from BIM model
• 3D reinforced concrete design in GZT and GZG (including DIN EN 1992-1-1/NA:2011, OEN B 1992-1-1:2011, SIA 262, NTC-D.M. 14/01/2008)
• 2D non-linear slab calculation according to Eurocode for realistic deflections and economical design
• Drop-out bedding for slabs
• Steel construction verifications according to Eurocode (EE, EP with automatic cross-section classification class 1-3)
• Graphically interactive plot creation

Der Beitrag 3D FEM professional erschien zuerst auf FIDES DV-Partner.

The package especially for 3D structural and civil engineering

The 3D FEM premium package offers all the functions required to successfully handle even the most demanding projects in structural and civil engineering. In addition to the input options with the AutoCAD® attachment SOFiPLUS or Autodesk® Revit® Structure, the package offers non-linear effects and pile elements for the simulation of soil-structure interaction.

The complete design according to Eurocodes, stability verifications and many international standards (e.g. BS EN 1992, SNIP, AASHTO) round off the verification options. The graphically interactive post-processing is extended by the integration of surface results, interfaces to Excel® and VBA offer full flexibility.

The functions at a glance

• 3D FE bar, pile, shell, slab and disc elements
• Any bar cross-sections with graphical input
• Beams and joists as FE bars
• Eigenvalues
• Simulation of construction phases and time-dependent effects for surface elements
• Automatic determination of elastic connection stiffnesses for 2D calculation when transferring from BIM model
• 3D reinforced concrete design in GZT and GZG (including DIN EN 1992-1-1/NA:2011, OEN B 1992-1-1:2011, SIA 262, NTC-D.M. 14/01/2008)
• Drop-out bedding for slabs
• Non-linear springs and working lines
• Non-linear bars for reinforced concrete and steel
• Theory II. Second order and steel construction verifications according to Eurocode (EE, EP with automatic cross-section classification class 1-3, effective widths for class 4 cross-sections)
• Graphically interactive plot creation
• Integration of area results

Der Beitrag 3D FEM premium erschien zuerst auf FIDES DV-Partner.

The high-end packages for structural engineering

The 3D FEM ultimate and ultimate 50 packages offer all functions for modern structural analysis in civil engineering and bridge construction. The graphical input options with the AutoCAD® attachment SOFiPLUS are extended by the parametric axis-related technology CABD, master cross-sections allow any cross-sectional profile. Prestressing for beam and shell elements with suitable stress and serviceability analyses allow the processing of prestressed concrete and composite construction projects.

The functions at a glance

• 3D FE bar, pile, shell, slab and disc elements
• Any bar cross-sections and master cross-sections with graphical input
• Beams and joists as FE bars
• Eigenvalues
• Parametric graphical modelling (CABD)
• Prestressing for bars and shells
• Simulation of construction phases and time-dependent effects for mixed systems and cross-sectional construction sections
• 3D reinforced concrete design in GZT and GZG (including DIN EN 1992-1-1/NA:2011, OEN B 1992-1-1:2011, SIA 262, NTC-D.M. 14/01/2008)
• Design and stress analysis of prestressed concrete and composite cross-sections (e.g. DIN-Fb, EN 1992-2, AASHTO, BS 5400)
• Special verifications of the recalculation guideline for road bridges
• Non-linear springs and working lines
• Non-linear bars for reinforced concrete and steel
• Fully geom. Non-linear calculation (third-order theory)
• Steel construction verifications according to Eurocode (EE, EP with automatic cross-section classification class 1-3, effective widths for class 4 cross-sections)
• Influence lines and traffic load models (road and rail)
• Graphically interactive plot creation
• Integration of area results

Der Beitrag 3D FEM ultimate / ultimate 50 erschien zuerst auf FIDES DV-Partner.

Designing and optimising structural steel connections has never been so easy. From a structural model of a SOFiSTiK calculation, you can easily select all nodes depending on the type of connection between the steel beams. STeelCON automatically determines the correct bar position in the connection. All data can be displayed graphically and interactively with the programmes SOFiSTiK-Animator or D.A.I.SY. can be selected. They are then presented as detailed graphics or as fully editable text embedded in tables. Powerful tools, such as the permanent updating of the graphics of the structural steel connection and the automatic distance check after each modification of the connection, allow the user to become familiar with the programme immediately. The engineer is informed about the degree of utilisation of each individual component of the structural steel connection and has full control over reducing or increasing the load-bearing capacity of the individual elements. The same connection can be designed for different nodes of the static model and for all load cases, and all associated results can be displayed in detail on the monitor.

Der Beitrag FIDES-STeelCON erschien zuerst auf FIDES DV-Partner.